Cisco SPA112 and SPA122 - Retrieving the Base IP Address

Before you can retrieve the IP of the ATA, you will need to ensure the following is completed:

• A handset is connected to the Phone 1 port on the ATA
• The power is connected to the ATA, and the power icon is lit
• An ethernet cable is connected from your router to the ATA, and the Internet light is lit (temporarily connect your computer to the SPA122's LAN port to configure it)

To retrieve the IP, pick up the handset and (if required) open a line. Dial **** (four asterisks)

SPA112

At the voice prompt menu, enter 110 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.

SPA122

At the voice prompt menu, enter 210 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.